Help~ unknown type of LCD!

Ansris · Post by **Ansris** » July 24th, 2005, 3:33 am

Hello,

I just recently finnished my LCD mod and have gotten everything set up but alas, it doesnt work:(. I read over the FAQ, the instal guides, got all the drivers i needed, checked my wiring ect, but it still doest work. All i get it one character block flashing and moving around on my screen. What am I doing wrong?!

Post by **limbo** » July 24th, 2005, 11:21 am

can you give some more information?

LCD type:

Connection:

Differences between virtual and physical display:

Any error messages:

Post by **IFR** » July 25th, 2005, 7:53 am

yeah provide as much information as you can. Its the only way we can help you.

_X7JAY7X_ · Post by **_X7JAY7X_** » July 25th, 2005, 9:36 pm

Need more information.

Also what windows are you running?

It sounds like your using a parallel LCD. If so what schematic are you using?

From what you have said so far, it sounds like your power wiring is ok since you have something on the screen. As far as the data lines, they could be wrong. What happens when you power up the LCD? Do you have a row of blocks at the top?

J