Everest plugin!

Post by **limbo** » September 24th, 2006, 3:59 pm

Since LAVALYS EVERESTsupports extraction of sensor values $\:D/$
New plugin is available: everest plugin

Get it for free from http://www.eserver.gr

naiserie · Post by **naiserie** » October 7th, 2006, 7:37 pm

works like a charm, thanks!

finally can completely dump MBM5.

andresz · Post by **andresz** » November 12th, 2006, 6:21 pm

shows only an "X" maybe for windows vista ?

Post by **limbo** » November 12th, 2006, 6:25 pm

andresz wrote:shows only an "X" maybe for windows vista ?

In vista you have to disable the user control...

if you want to access the registry is essential

donpi · Post by **donpi** » January 6th, 2007, 10:32 pm

I have a problem with plugin of everest does not work. failed says ?Load library failed with #126? because it can be this?
Pardon by my English but is that not to be spoken

Thanks to it and I hope very well to solve the problem

Post by **limbo** » January 7th, 2007, 1:32 am

donpi wrote:I have a problem with plugin of everest does not work. failed says ?Load library failed with #126? because it can be this?
Pardon by my English but is that not to be spoken

Thanks to it and I hope very well to solve the problem

Install .Net framework 2.0

Razerz · Post by **Razerz** » February 22nd, 2007, 11:22 am

andresz wrote:shows only an "X" maybe for windows vista ?

I get the same problem, except I am using XP home. Anyone who knows why?

elesquiador · Post by **elesquiador** » February 22nd, 2007, 9:13 pm

The trial version of everest does not provide access to all sensors. Did you buy everest ultra? I have not used the older (free) versions, but I got the X before I registered my copy. I believe the plugin will also return an X if everest is not running or if writing to the registry is not enabled.

Razerz · Post by **Razerz** » February 22nd, 2007, 10:43 pm

I have only used the free trail version. So that's propably my problem. Thanks for your help.

Post by **limbo** » February 23rd, 2007, 4:32 pm

elesquiador wrote:The trial version of everest does not provide access to all sensors. Did you buy everest ultra? I have not used the older (free) versions, but I got the X before I registered my copy. I believe the plugin will also return an X if everest is not running or if writing to the registry is not enabled.

Thats correct the X is returned from pluging in any "no value" condition.
can you check with registry editor for values to your registry?

T1125P · Post by **T1125P** » April 15th, 2007, 8:30 pm

Hi all I'm new to lcd smartie, I been using crystalcontrol on my 631 lcd. I downloaded the plugin for everest, I also have everest full version, how do I setup lcd smartie to show the temps on my lcd?

Post by **IFR** » April 16th, 2007, 6:09 pm

hi T1125P

You should read the text file that comes with the plugin.

Post by **limbo** » April 16th, 2007, 9:21 pm

IFR wrote:hi T1125P

You should read the text file that comes with the plugin.

Yeah Yeah, RTFM

Hey T1125P, no hard feelings

T1125P · Post by **T1125P** » April 17th, 2007, 12:22 am

hehe no problem thanks all.

GiZZeRR · Post by **GiZZeRR** » July 14th, 2007, 12:53 pm

Hi guys, been using LCD Smartie for a while now...just basic stuff and it is great, thanks.

Anyway, what i want to ask is....how can I read extra sensors on my board? I have just bought an Asus Striker Extreme and it has lots of options like... 3 extra temp sensors that I can use anywhere in my system. They work fine in everest but where do I get the information to use them in LCD Smartie? For example, Tmobo will give me the temp of the motherboard but what are these other sensors called? Also have 5 extra fan outputs that I need info on. Probably a simple answer to this but i'm a simple man

Thanks
John

Post by **limbo** » July 16th, 2007, 2:36 pm

There is a list of sensors in the dll package. you have to play aroung with the sensors to see which is giving the result of your hardware.

Post by **limbo** » April 12th, 2008, 10:28 pm

UPDATE: The sensor list was provided by EVEREST (Lavalys). It may be changed so the plugin can be used in any case with the new one (if any).

DotA_Player · Post by **DotA_Player** » May 15th, 2008, 10:15 am

Hello, don't you want set plugin so it will show 0 value instead of last value > 0 ? It's possible to set motherboard to stop fans if temperature is low, or if something will stop fan, display will still show last value.

PS : If you stop fan (by hand) , Everest will delete this one from sensor list, if you will leave fan working, this fan will be on list again.

Post by **limbo** » July 12th, 2010, 7:58 am

I'm attaching a sensor list (a new version with more sensors provided by Everest).
Refer to this list to get your system values.

Don't forget to enable write to registry!

LCD Smartie

Everest plugin!

Everest plugin!

don?t works

Re: don?t works

Re: don?t works

Extra sensors...how?

zero

Re: Everest plugin!