I'm using lcd smartie VS 5.4 together with 3 pieces of LCD2USB displays.
The problem is that only one works with Lcdsmartie. The rest display only "lcd2usb V1.08' and nothing else.
Is it possible to use all 3 of them together wit lcdsmartie??
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCDSmartie and more than 1 display
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351
-
mattcro
- Forum Supporter
- Posts: 590
- Joined: March 8th, 2006, 1:58 pm
- Location: Scotland
Re: LCDSmartie and more than 1 display
You have to run 1 instance of Smartie for each LCD that you want to use. I don't know if it's possible to use more than 1 of the same type of USB connected LCD - it might get confused as to which display is which if they are all the same.
For displays that emulate a serial port, you can just set each display to a different port and then each copy of Smartie can address its own display.
For displays that emulate a serial port, you can just set each display to a different port and then each copy of Smartie can address its own display.
-
GizmoTheGreen
- Posts: 53
- Joined: November 19th, 2008, 12:00 pm
Re: LCDSmartie and more than 1 display
with USB2LCD+ each lcdsmartie instance can be set to use a unique screen (each screen has a programmable ID)
-
mib
- Posts: 3
- Joined: October 17th, 2009, 1:46 pm
Re: LCDSmartie and more than 1 display
Still doesn't work as I want. Only few times I was able to run both displays.GizmoTheGreen wrote:with USB2LCD+ each lcdsmartie instance can be set to use a unique screen (each screen has a programmable ID)
I don't know why.
Any more solutions for that??
I tries to:
-change usb ports with or witout hub
-different locations for lcdsmartie