Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD to USB
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351, hydrolisk1792
-
steve811
- Posts: 4
- Joined: July 25th, 2009, 4:19 pm
LCD to USB
I have recently bought the interface board from LCD modkits on Ebay. This I have soldered to the HD44780 board and checked as best I can that all the joints are good. When I plug it in I get the backlight ona nd the message "LCD2USb V1.0" on the screen, and the computer recognises the LCD2USB board plugged into the USB port. However, LCD Smartie says that the board is not detected and fails to display anything. LCD smartie is using the LCD2USB DLL but I cannot get anywhere with this! Any ideas?
-
caesar
- Forum Supporter
- Posts: 734
- Joined: October 15th, 2005, 10:39 am
- Location: Romania
- Contact:
Re: LCD to USB
Check the lcd2usb plugin dependencies!
Look for dnbridge, .net requirements etc.
Look for dnbridge, .net requirements etc.
-
steve811
- Posts: 4
- Joined: July 25th, 2009, 4:19 pm
Re: LCD to USB
Sorry to be so thick, but how do I do that?
-
caesar
- Forum Supporter
- Posts: 734
- Joined: October 15th, 2005, 10:39 am
- Location: Romania
- Contact:
Re: LCD to USB
This should help you further: http://forums.lcdsmartie.org/viewtopic.php?f=4&t=245
-
steve811
- Posts: 4
- Joined: July 25th, 2009, 4:19 pm
Re: LCD to USB
Tried that, .net is loaded, dnbridge dll is available and so is MSCv dll. What else can I try?
-
steve811
- Posts: 4
- Joined: July 25th, 2009, 4:19 pm
Re: LCD to USB
Now got this working after vista decided to instal it and after changing the USB cable! Don't know what it was but it works!