Beta tester USB LCD

Ruben · Post by **Ruben** » October 5th, 2005, 3:40 pm

HTvision is an online LCD store and we've developed a USB LCD. The display works almost the same as the Crystalfontz USB LCD's (632 and 634). It looks to work fine with Smartie software, but we would like to be sure. Therefore we're looking for a couple of serious beta testers. If your interested you can send an email to htvision.com or a PM.

Ruben · Post by **Ruben** » October 7th, 2005, 12:39 am

Thanks for all reactions so far! We've selected some beta testers who are willing to test the USB-LCD for us. When the displays are on market I will post again in this thread

Ruben · Post by **Ruben** » November 21st, 2005, 4:17 pm

I would like to thank our Beta testers. With their useful help we could create a good working USB-LCD wich is compatible with Smartie LCD.

Post by **limbo** » November 21st, 2005, 6:25 pm

It was a pleasure Ruben.

Don't forget to mention our program to LCD buyers

_X7JAY7X_ · Post by **_X7JAY7X_** » November 22nd, 2005, 6:18 am

I agree, if you need anything else tested email me.

J

penjuin · Post by **penjuin** » November 23rd, 2005, 9:55 am

Yep, i'm open too for questioning

mouse5312 · Post by **mouse5312** » May 29th, 2006, 8:25 pm

I've got an HTVision USB LCD here. And I'm writing my own linux software for it.
But my problem is that I can't use the scrolling marquee function (/021 and /022 from CrystalFontz).
What command do you send to the controller, so the text can scroll over the display?
I ask the creators of the USB LCD controller this question and the don't have an answer on it...

Thanx..

_X7JAY7X_ · Post by **_X7JAY7X_** » June 3rd, 2006, 7:39 am

From what I understood during testing, the HTVision supports only basic functions. Scrolling is most likely not one of them. LCDSmartie doesnt use the scroll command for the MO displays, I assume it doesnt for the CF displays either. You will have to do it in the software.

J