Pico miniboc LCD- will it work

apcyberax · Post by **apcyberax** » March 26th, 2008, 7:43 am

Hi any of you people know if this lcd will work

http://linitx.com/viewproduct.php?prodid=11294

if so anyone know the settings i can't seem to find any info on this

Post by **caesar** » March 26th, 2008, 11:00 am

The same here, they advertise all kind of stuff, but no information is really available.
I suggest you stay away from it until they put up some proper support.

apcyberax · Post by **apcyberax** » March 26th, 2008, 8:34 pm

to late already got it. would love to get it working.

Post by **caesar** » March 26th, 2008, 10:44 pm

Please post any information you've got on it. Manuals, commands, as what type of device it is identified in windows...

apcyberax · Post by **apcyberax** » March 26th, 2008, 11:06 pm

he software and manuals are all on http://www.mini-box.com/picoLCD-20x2-OEM?category=490

also when you open the server software for this it says the following

ITUNER HIDDaemon ver 1.0.0.13
Manuf:ITUNER INC Prod:USB-LCD-20x2/USB-LCD-20x2 Flasher vendor=4d8 pid=1,2 TCP/I
P port:10000
HID device ITUNER INC USB-LCD-20x2 opened

Post by **caesar** » March 26th, 2008, 11:55 pm

Sorry, I am unable to download anything from their site...
Please, if you have the files, try to put them in an archive on http://mihd.net

apcyberax · Post by **apcyberax** » March 27th, 2008, 10:22 am

all zipped up
http://mihd.net/oe9scdk

Post by **caesar** » March 28th, 2008, 12:03 am

The bad news:
It won't work out of the box with LCDSmartie, a display driver is needed.

The somewhat good news:
If you know your way with delphi or c++ you could write yourself a display driver.
For the moment I am pretty tight with my spare time, but if nobody else could take a try at writing a display driver I could make a try in a few weeks.

apcyberax · Post by **apcyberax** » March 29th, 2008, 1:08 pm

i wouldn;t know where to start with writing one.

There is a command line tool that comes with the lcd panal is it possable to get ledsmartie to send the data by command line commands?

Post by **caesar** » March 30th, 2008, 12:09 pm

Please make an official request in the plugin request forum. When I'll free up a little bit, I will fill the request if still open.

There is no way to send the data by command line.