I plan to use LCD Smartie to show system status info on a set of old analog gauges. I'm making custom hardware -- a PIC18F2550 running a USB/CDC firmware (virtual serial port), with a software PWM to control the gauges.
I'll probably write my firmware to work best with a simple 'test driver' setup. It will be easiest to send simple ASCII strings and program the 'return to beginning' sequence to be the new line character -- or full newline sequence if possible, 0eh 0dh. The design files will be available for download when its completed.
Great application!
ian
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie with USB/CDC (virtual serial port) PIC18F2550
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351, hydrolisk1792
-
ian
- Posts: 8
- Joined: January 25th, 2008, 4:30 pm
-
caesar
- Forum Supporter
- Posts: 734
- Joined: October 15th, 2005, 10:39 am
- Location: Romania
- Contact:
You could take a look here: http://forums.lcdsmartie.org/viewtopic. ... highlight=
Maybe get some ideas.
Good luck!
Maybe get some ideas.
Good luck!